Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information

4-16 Chapter 4: BIOS setup
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Conguration
Intel VT-d Conguration
South Bridge Conguration
←→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
NorthBridge Chipset Conguration
MCH Branch Mode [Branch Interleave]
Patrol Scrubbing [Enabled]
Demand Scrubbing [Disabled]
Branch Dependent Sparing [Disabled]
Branch 0 [Enabled]
Branch Specic Sparing [Disabled]
Rank Interleaving [4:1]
Branch 1 [Enabled]
Branch Specic Sparing [Disabled]
Rank Interleaving [4:1]
MemCool Mode [Disabled]
Intel QuickData Tech. [Enabled]
PCIe Link Speed [Auto]
PCIE1 Slot Payload Size [Auto]
PCIE3 Slot Payload Size [Auto]
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
4.4.2 Chipset Conguration
The Chipset conguration menu allows you to change advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
North Bridge Conguration
The North Bridge Conguration menu allows you to change the Northbridge
settings.
Congure North Bridge
features.
Sequencing:
allocates address
branch 0 then 1.
Interleaving:
interleaves branch
across branches.
Mirroring:
mirrors branch
space
between branches.
Single Channel:
forces single ch-0.
MCH Branch Mode [Branch Interleave]
Allows you to select the MCH branch mode.
Conguration options: [Branch Sequencing] [Branch Interleave] [Branch Mirroring]
[Single Channel 0]
Patrol Scrubbing [Enabled]
Enables or disables the Patrol Scrubbing.
Conguration options: [Disabled] [Enabled]










