Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information
ASUS DSEB-D16 Series 2-33
2. VGA controller setting (3-pin VGA_EN1)
This jumper allows you to enable or disable the onboard VGA controller. Set
to pins 1-2 to activate the VGA feature.
®
DSEB-D16 Series VGA setting
VGA_EN1
1 2 2 3
Enable
(Default)
Disable
3. LAN controller setting (3-pin LAN_EN1, LAN_EN3, LAN_EN4)
These jumpers allow you to enable or disable the onboard Intel
®
82563EB
Gigabit LAN controller and the onboard Intel
®
82573L Gigabit LAN controllers.
Set to pins 1-2 to activate the Gigabit LAN feature.
®
DSEB-D16 Series LAN setting
LAN_EN1
Enable
(Default)
Disable
LAN_EN3
Enable
(Default)
Disable
LAN_EN4
Enable
(Default)
Disable
2 31 2
2 31 2
2 31 2
The LAN_EN1 jumper is for the Intel
®
82563EB Gigabit LAN controller, which
controls LAN1 and LAN2 ports.