Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information
ASUS DSEB-D16 Series 2-23
Four DIMMs per channel (Dual ranks)
Branch0
Channel 0 Channel 1
DIMM_00
(512MB*2 Ranks)
DIMM_10
(512MB*2 Ranks)
Rank 0
(512 MB)
Rank 1
(512 MB)
Rank 0
(512 MB)
Rank 1
(512 MB)
Sparing
Memory space
1024 MB 1024 MB
DIMM_01
(1024MB*2 Ranks)
DIMM_11
(1024MB*2 Ranks)
Rank 0
(1024 MB)
Rank 1
(1024 MB)
Rank 0
(1024 MB)
Rank 1
(1024 MB)
Sparing
Memory space
2048 MB 2048 MB
DIMM_02
(2048MB*2 Ranks)
DIMM_12
(2048MB*2 Ranks)
Rank 0
(2048 MB)
Rank 1
(2048 MB)
Rank 0
(2048 MB)
Rank 1
(2048 MB)
Sparing
Memory space
4096 MB 4096 MB
DIMM_03
(4096MB*2 Ranks)
DIMM_13
(4096MB*2 Ranks)
Rank 0
(4096 MB)
Rank 1
(4096 MB)
Rank 0
(4096 MB)
Rank 1
(4096 MB)
Sparing
Memory space
4096 MB 4096 MB
Total Memory
22528