Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information
ASUS DSEB-D16 Series 2-17
Rank population
DIMM installation reference table
• DIMMs in pair means two DIMMs with the same conguration.
• For better performance, same conguration DIMMs should be installed on
the same slot number for each channel. For example, you may install the
same type of DIMMs in DIMM_00, and DIMM_10.
DIMM_01
DIMM_00
DIMM_21
DIMM_22
DIMM_31
DIMM_32
DIMM_30
Slot 0
Slot 0
Slot 2
Slot 2
MCH
Slot 1
Ch:3
Slot 0
Slot 1
Ch:2
Slot 0
Slot 1
Ch:1
Slot 2
Slot 1
Ch:0
Slot 2
DIMM_20
DIMM_02
DIMM_11
DIMM_10
DIMM-12
DIMM_23
DIMM_33
Slot 3
Slot 3
DIMM-13
DIMM_03
Slot 3
Slot 3
No. of
DIMMs
Slot/s to use
1 DIMM_00
2 DIMM_00, DIMM_10
4 DIMM_00, DIMM_10, DIMM_20, DIMM_30
8 DIMM_00, DIMM_10, DIMM_20, DIMM_30
DIMM_01, DIMM_11, DIMM_21, DIMM_31
12 DIMM_00, DIMM_01, DIMM_02
DIMM_10, DIMM_11, DIMM_12
DIMM_20, DIMM_21, DIMM_22
DIMM_30, DIMM_31, DIMM_32
16 DIMM_00, DIMM_01, DIMM_02, DIMM_03
DIMM_10, DIMM_11, DIMM_12, DIMM_13
DIMM_20, DIMM_21, DIMM_22, DIMM_23
DIMM_30, DIMM_31, DIMM_32, DIMM_33