Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information
2-10 Chapter 2: Hardware information
Internal connectors Page
1. Floppy disk drive connector (34-1 pin FLOPPY1)
2-38
2. IDE
connector (40-1 pin PRI_IDE1)
2-38
3. Serial ATA connectors
(7-pin SATA1, SATA2, SATA3, SATA4, SATA5, SATA6 )
2-39
4. SAS LSI1068 ports LED connector (18-1 pin SASLED1)
(DSEB-D16/SAS model only)
2-39
5. SAS connectors
(DSEB-D16/SAS model only)
2-40
6. Serial General Purpose Input/Output connector
(6-1 pin SGPIO1)
(DSEB-D16 model only)
2-41
7. Hard disk activity LED connector (4-pin HDLED1)
2-41
8. USB connectors (10-1 pin USB34)
2-42
9. CPU and system fan connectors (4-pin CPU_FAN1/2,
REAR_FAN1/2, FRNT_FAN1/2/3/4, FBD_FAN1/2)
2-42
10. Serial port connectors (10-1 pin COM2)
2-43
11. LPC debug connector (14-1 pin LPC1)
2-43
12. Power supply SMBus connector (5-pin PSUSMB1)
2-44
13. SSI power
connectors
(24-pin ATXPWR1, 8-pin ATX12V1, 4-pin ATX12V2)
2-44
14. System panel
connector (20-1 pin PANEL1)
2-45
15. Auxiliary panel connector (20-pin AUX_PANEL1)
2-46