Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information
2-2 Chapter 2: Hardware information
3. Hearbeat LED (for DSEB-D16/SAS only)
The green heartbeat LED blinks per second to indicate that the LSI 1068
chipset is working normally.
®
DSEB-D16 Series Heart Beat LED
ON
LED1
LSI SAS 1068
starts working
2. CPU Warning LED
The red CPU warning LED lights up as a reminder if CPU is not installed or
not properly installed in the CPU socket 2.
• When installing only one CPU, the CPU has to be installed to CPU2 socket
for a better thermal environment.
• If the CPU warning LED lights up, the motherboard will not boot.
®
DSEB-D16 Series CPU warning LED
ON OFF
CPU_WARN1
CPU1 not present
CPU1 present
(red)