Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information
6-22 Chapter 6: Driver installation
6.4 VGA driver installation
This section provides instructions on how to install the XGI Volari Z9s Video
Graphics Adapter (VGA) driver.
1. Restart the computer, then log on with Administrator privileges.
2. Insert the motherboard/system support CD to the optical drive. The support
CD automatically displays the Drivers menu if Autorun is enabled in your
computer.
The
Drivers menu if Autorun is enabled in your computer.
6.4.1 Windows
®
2000/Server 2003
You need to manually install the XGI Volari Z9s VGA driver on a Windows
®
2000 /
Server 2003 operating system. To install the XGI Volari Z9s VGA driver:
3. The XGI VGA Package window appears, preparing the setup.