Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information
6-16 Chapter 6: Driver installation
6.3 LAN driver installation
This section provides the instructions on how to install Intel
®
Gigabit LAN controller
drivers.
6.3.1 Windows 2000/Server 2003
To install the Intel
®
Gigabit LAN controller driver on a Windows
®
2000/ Server 2003
OS:
1. Restart the computer, and then log on with
Administrator
privileges.
2. Insert the motherboard/system support CD to the optical drive. The CD
automatically displays the
Drivers
menu if Autorun is enabled in your
computer.
• Windows
®
automatically detects the LAN controllers and displays
window. Click
Cancel
to close this window.
• If
Autorun
is NOT enabled in your computer, browse the contents of the
support CD to locate the le
AUTORUN.EXE
from the
\Drivers\Intel 82563EB
folder. Double-click the
AUTORUN.EXE
and
follow step 4 to run the installation.
3. Click the
Intel
®
PRO/1000 EB Network Connection
option.