Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information
ASUS DSEB-D16 Series 6-7
4. Insert the RAID driver disk you created earlier to the oppy disk drive, then
press <Enter>.
5. Select the RAID controller driver from the list, then press <Enter>.
•
Intel
®
6321ESB Intel
®
MATRIX STORAGE
driver:
- If SATA RAID mode is to enabled, select
Intel ESB2 SATA RAID Controller
(Server ESB2)
.
- If SATA AHCI mode is enabled, select
Intel ESB2 SATA AHCI Controller
(Server ESB2)
.
LSI Logic Fusion-MPT SAS Driver (Server 2003 32-bit)
LSI Logic Fusion-MPT Driver for SAS1064
LSI Logic Fusion-MPT Driver for SAS1068
LSI Logic Fusion-MPT Driver for SAS1064E
LSI Logic Fusion-MPT Driver for SAS1068E