Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information
ASUS DSEB-D16 Series 6-5
For systems with other Lunix versions that are not listed in the Makedisk menu,
explore the support CD and copy the driver le from the following path: For LSI
Logic Embedded SATA RAID Driver:\Drivers\6321 LSI MegaRAID\ Driver\Linux\;
For LSI1068 SAS RAID Driver:\Drivers\LSI 1068 B1\Drivers\Linux\; For Marvell
SATA RAID Driver:\Drivers\MARVELL 6145 SATA RAID\Driver\Linux.
The Windows Server 2003 64-bit OS RAID driver disk for the LSI1068 SAS
controller is located in:
\
Drivers\LSI 1068 B1\Driver\makedisk\2k3_64.exe
3. Insert a formatted high-density oppy disk to the oppy disk drive.
4. Follow screen instructions to complete the process.
5. After creating a RAID driver disk, eject the oppy disk, then write-protect it to
prevent computer virus infection.
To create a RAID driver disk in Red Hat
®
Enterprise Linux server environment:
1. Insert a blank formatted high-density oppy disk to the oppy disk drive.
2. Decompress the le into the oppy disk from the following path in the support
CD:
For LSI Logic Embedded SATA RAID Driver:
\Drivers\6321 LSI MegaRAID\Driver\makedisk
For LSI1068 SAS RAID Driver:
\
Drivers\LSI 1068 B1\Driver\Makedisk
For Marvell SATA RAID Driver:
\
Drivers\MARVELL 6145 SATA RAID\Driver\Linux
3. Eject the oppy disk.