Computer Hardware User Manual

5-28 Chapter 5: RAID conguration
5.2.8 Selecting the boot drive from a RAID set
You must have created a new RAID conguration before you can select the
boot drive from a RAID set. Refer to the
Creating a RAID set: Using New
Conguration
section for details.
To select the boot drive from a RAID set:
1. From the
Management Menu
, select
Congure
>
Select Boot Drive
, then
press <Enter>.
2. When prompted, use the arrow keys to select the bootable logical drive from
the list, then press <Enter>.
3. The logical drive is selected as boot drive. Press any key to continue.
LSI Logic Software RAID Conguration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
Check Consistency
Select A Boot VD
Conguration Menu
Easy Conguration
New Conguration
View/Add Conguration
Clear Conguration
Select Boot Drive
LSI Logic Software RAID Conguration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
Check Consistency
Select A Boot VD
Conguration Menu
Easy Conguration
New Conguration
View/Add Conguration
Clear Conguration
Select Boot Drive
Bootable VDs(1):Current Boot VD(0)
Boot Drive 0