Computer Hardware User Manual
Table Of Contents
- DSEB-D16 Series specifications summary
- Typography
- About this guide
- Safety information
- Notices
- Product introduction
- Hardware information
- Powering up
- BIOS setup
- RAID configuration
- 5.1 Setting up RAID
- 5.2 LSI Software RAID Configuration Utility
- 5.2.1 Creating a RAID 0 or RAID 1 set
- 5.2.2 Creating a RAID 10 set
- 5.2.3 Adding or viewing a RAID configuration
- 5.2.4 Initializing the logical drives
- 5.2.5 Rebuilding failed drives
- 5.2.6 Checking the drives for data consistency
- 5.2.7 Deleting a RAID configuration
- 5.2.8 Selecting the boot drive from a RAID set
- 5.2.9 Enabling the WriteCache
- 5.3 Intel® Matrix Storage Manager Option ROM Utility
- 5.4 Global Array Manager
- 5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)
- Driver installation
- Reference information
xii
DSEB-D16 Series specications summary
*Specications are subject to change without notice.
Storage SAS Controller
LSI 1068 PCI-X 8-port
SAS controller:
LSI
®
Integrated RAID
0, 1, 1E support
Optional LSI
®
ZCR
(Zero-Channel-RAID)
PCI-X card:
(For upgrade to
support hardware
RAID 0, 1, 10, 5, 50)
--
Networking LAN
Intel
®
6321+ Intel
®
82563EB Dual Port GbE
Intel
®
82573 GbE * 2
Graphic VGA
XGI Z9s PCI Display Controller 32MB
Onboard I/O
Connectors
Floppy Connector
1 1
PSU Connector
24-pin ATX power connector + 8-pin ATX 12V
power connector + 4-pin ATX 12V power connector
Management
Connector
SO-DIMM socket for ASMB3-SOL
USB Connectors
1 (support 2 USB ports)
Fan Header
10*4-Pin
SMBus
2 2
Chassis Intruder
1 1
Front LAN LED
2 2
Serial Port Header
1 1
Rear I/O
Connectors
External Serial
Port
1 1
External USB Port
2 2
VGA Port
1 1
RJ-45
4 4
RJ-45 for iKVM
1 1
PS/2 KB/Mouse
1 1
Management
Solution
Software
ASWM2.0
Out of Band
Remote
Management
Optional (ASMB3-SOL/ASMB3-iKVM)
Monitoring CPU Temperature
� �
FAN RPM
� �
Environment
Operation temperature: 10℃ ~ 35℃
Non operation temperature: -40℃ ~ 70℃
Non operation humidity: 20% ~ 90% ( Non
condensing)