User’s Manual

2-28 Chapter 2: Hardware information
2. LAN bandwidth setting (3-pin LAN_BW1)
This jumper allows you to set the LAN bandwidth setting for more efcient IP
load distribution.
®
DSBF-DM Series
DSBF-DM Series LAN bandwidth setting
LAN_BW1
Balanced mode
(Default)
LAN Centric mode
2 31 2
3. VGA controller setting (3-pin VGA_EN1)
This jumper allows you to enable or disable the onboard VGA controller. Set
to pins 1-2 to activate the VGA feature.
®
DSBF-DM Series
DSBF-DM Series VGA setting
VGA_EN1
1 2 2 3
Enable
(Default)
Disable