User Manual
ASUS DSBF-D12 Series 5-51
4. Use the arrow key to select the disk you would like to congure as hot spare,
then move the cursor to the Hot Spr column. Press <+>, <->, or <Space>.
The Drive Status column eld now shows Hot Spare.
Press <C> to commit the changes.
Synchronizing the array
Synchronizing the array allows the utility to resynchronize data on the mirrored disk
in the array. This procedure is seldom required because data synchronization is
automatically done during normal operation.
To synchronize the array:
1. Follow steps 1 ~ 3 of the section “Viewing volume properties” and step 2 of
the section “Managing hot spares.”
2. From the
Manage Array
screen select
Synchronize Array
, then press
<Enter>.
3. Press <Y> to begin the synchronization, or <N> to cancel.