User Manual

ASUS DSBF-D12 Series 5-47
6. Repeat step 5 to add the other disks to the volume.
7. When done, press <C> to create the array, then select Save changes then
exit this menu.
By default, the RAID Disk eld shows No before array creation. This eld is
grayed out under the following conditions:
• The disk does not meet the minimum requirements for use in a RAID array.
• The disk is not large enough to mirror existing data on the primary drive.
• The disk has been selected as the Hot Spare for the RAID array.
• The disk is already part of another array.
9. The utility creates the array.