User Manual
2-32 Chapter 2: Hardware information
6. LAN controller setting (3-pin LAN1_EN1)
This jumper allows you to enable or disable the onboard Intel
®
82563EB
Gigabit LAN controller. Set to pins 1-2 to activate the Gigabit LAN feature.
7. Intel
®
6321ESB SATA port S/W RAID setting (3-pin RAID_SEL1)
(DSBF-D and DSBF-D/1U models only)
This jumper allows you to select the Serial ATA RAID conguration utility to
use when you create disk arrays. Both utilities are supported by the Intel
®
6321ESB. Place the jumper caps on pins 1-2 if you want to use the LSI
MegaRAID Serial ATA RAID utility (default); otherwise, place the jumper caps
on pins 2-3 to use the Intel
®
Matrix Storage Manager (IMSM).
®
DSBF-D Series
DSBF-D Series LAN1_EN setting
LAN1_EN1
Enable
(Default)
Disable
1
2 2
3
®
DSBF-D Series
DSBF-D Series 6321ESB SATA port S/W RAID setting
RAID_SEL1
Intel
®
MSM RAID
1
2 2
3
LSI Mega RAID
(Default)