Specifications

DS300f G2 Series User Manual
89
SavInG the PhySIcal DrIve Smart loG
To save the physical drive SMART Log:
1. Click the Device tab.
2. Click the Physical Drive icon.
3. Clickthephysicaldriveyouwant,thenclicktheView button.
4. Click the SMART Log tab.
5. Click the Save Advanced SMART Log button.
YourbrowsersavesatextlecontainingtheSMARTLogtoitsdesignateddownloadfolder.
locatInG a PhySIcal DrIve
ThisfeaturecausesthedrivecarrierLEDstoblinkforoneminutetoassistyouinlocatingthephysicaldrive,
andissupportedbyRAIDsubsystemsandJBODexpansionunits.
To locate a physical drive:
1. Click the Device tab.
2. Click the Physical Drive icon.
3. Clickthephysicaldriveyouwant,thenclicktheLocate button.
ThedrivecarrierstatusLEDashesforoneminute.
vIewInG PhySIcal DrIve Smart loG InformatIon
To view physical drive SMART Log information:
1. Click the Device tab.
2. Click the Physical Drive icon.
3. Clickthephysicaldriveyouwant,thenclicktheView button.
4. Click the SMART Log tab.
SMART Log information includes:
IftheSMARTLogisdisabled,seeMaking Controller Settings.
•
Inprogress
• SMARTSupport–Yesorno,
dependsonthedrive
• SMARTLogEnabled–Enabled
ordisabled,seeNotebelow
• SMARTHealthstatus–OKisnormal
• SCTStatusVersion
• SCTVersion
• SCTSupportLevel
• DeviceState
• CurrentTemperature
• PowerCycleMinTemperature
• PowerCycleMaxTemperature
• LifetimeMinTemperature
• LifetimeMaxTemperature
• UnderTemperatureLimitCount
• OverTemperatureLimitCount