Specifications

DS300f G2 Series User Manual
80
telnet ServIce
Telnet service enables you to access the RAID subsystem’s Command Line Interface (CLI) through a network
connection.
stoPPing telnet service
To stop the Telnet service:
1. Click the Administration tab.
2. Click the Services icon.
3. Click Telnet service and click the Stop button.
4. Click the Conrm button.
To start the Telnet service after stopping it:
1. Click the Administration tab.
2. Click the Services icon.
3. Click Telnet service and click the Start button.
restArting telnet service
To restart the Telnet service:
1. Click the Administration tab.
2. Click the Services icon.
3. Click Telnet service and click the Restart button.
MAking telnet settings
To change Telnet service settings:
1. Click the Administration tab.
2. Click the Services icon.
3. Click Telnet service and click the Settings button.
4. Make settings changes as required:
• Chooseastartuptype,
Automatic–Startsandrunswiththesubsystem.
Manual–(default)Youstarttheservicewhenyouneedit.
• Portnumber–Defaultis2300.
• MaxNumberofConcurrentConnections–Defaultis4.
Maximumnumberis4.
• SessionTimeOut–Defaultis24minutes.
5. Click the Save button.
6. Click the Conrm button.
SSh ServIce
Secure Shell (SSH) service enables you to access the subsystem’s Command Line Interface (CLI) through a
network connection.
stoPPing ssh service
To stop SSH service:
1. Click the Administration tab.
2. Click the Services icon.
3. Click SSH service and click the Stop button.
4. Click the Conrm button.
To start SSH service after stopping it:
1. Click the Administration tab.
2. Click the Services icon.
3. Click SSH service and click the Start button.
restArting ssh service
To restart SSH service:
1. Click the Administration tab.
2. Click the Services icon.
3. Click SSH service and click the Restart button.