Specifications

DS300f G2 Series User Manual
79
SlP ServIce
Service Location Protocol (SLP) discovers services over the Internet. SLP applies to IPv4 protocol only.
stoPPing slP service
To stop the SLP service:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the SLP service and click the Stop button.
4. Click the Conrm button.
To start the SLP service after stopping it:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the SLP service and click the Start button.
restArting slP service
To restart the SLP service:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the SLP service and click the Restart button.
MAking slP settings
To change SLP service settings:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the SLP service and click the Settings button.
4. Choose a startup type:
•
Automatic–(default)Startsandrunswiththesubsystem.
• Manual–Youstarttheservicewhenyouneedit.
5. Click the Save button.
6. Click the Conrm button.
webServer ServIce
Webserver service connects the ASUS Storage Management interface to the RAID subsystem though your
browser.
stoPPing webserver service
To stop the Webserver service:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Webserver service and click the Stop button.
4. Click the Conrm button.
To start the Webserver service after stopping it:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Webserver service and click the Start button.
restArting webserver service
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Webserver service and click the Restart button.
MAking webserver settings
To change Webserver service settings:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Webserver service and click the Settings button.
4. Make settings changes as required:
•
Chooseastartuptype,
Automatic–(default)Startsandrunswiththesubsystem.
Manual–Youstarttheservicewhenyouneedit.
• SessionTimeOut–Defaultis24minutes.
5. Click the Save button.
6. Click the Conrm button.