Specifications

DS300f G2 Series User Manual
70
creatInG a uSer
This action requires Administrator or SuperUser privileges.
To create a user:
1. Click the Administration tab.
2. Click the User Management icon.
3. Click the Add User button.
4. In the Add Userdialogbox,entertheinformationintheeldsprovided:
• Name–Thisistheuser’sloginname
• DisplayName
• Password
•
RetypePassword
• UserEmail–Requiredforeventnotication
5. Choose a privilege level from the drop-down menu. See the table below for a description of the privilege
types.
6. (Optional) Uncheck the Enable box to disable this User account.
7. Click the Save button. The user is added to the list.
Important
Forthisusertoreceiveeventnotication,ClickthenewuserandclicktheSubscription button.
User Privileges
Level Meaning
View
Allowstheusertoseeallstatusandsettingsbutnottomakeanychanges
Maintenance
AllowstheusertoperformmaintenancetasksincludingRebuilding,PDM,Media
Patrol,andRedundancyCheck
Power
Allowstheusertocreate(butnotdelete)diskarraysandlogicaldrives,changeRAID
levels,changestripesize;changesettingsofcomponentssuchasdiskarrays,logical
drives,physicaldrives,andthecontroller
Super
Allowstheuserfullaccesstoallfunctionsincludingcreateanddeleteusersand
changingthesettingsofotherusers,anddeletediskarraysandlogicaldrives.
Thedefault“administrator”accountisaSuperUser
makInG uSer SettInGS
This action requires Administrator or a SuperUser privileges.
To make user settings:
1. Click the Administration tab.
2. Click the User Management icon.
3. IntheUserlist,clicktheuseryouwant,thenclickSettings.
4. Make settings changes as required:
•
FortheEnablebox,checktoenablethisuseraccount,unchecktodisablethisuseraccount
• IntheUserSettingsdialogbox,enteranewDisplay NameorUser Email address
•
ChooseanewPrivilegelevelfromthedrop-downmenu.
Seethetableonthenextpage.
5. Click the Save button.
chanGInG uSer PaSSworDS
This action requires Administrator or SuperUser privileges.
To change a user’s password:
1. Click the Administration tab.
2. Click the User Management icon.
3. IntheUserlist,clicktheuseryouwant,thenclickChange Password.
4. IntheChangePassworddialogbox,entertheinformationintheeldsprovided:
• NewPassword
• RetypePassword
5. Click the Save button.