Specifications

DS300f G2 Series User Manual
69
makInG maIntenance moDe SettInGS
Each controller has its own IP addresses for access when the controller goes into maintenance mode. For more
information,see"Maintenance Mode" on page <?>.
Beforeyouchangesettings,pleasesee“AboutIPAddresses”onpage36.
To make maintenance mode settings:
1. Click the Administration tab.
2. Click the Network Management icon.
3. Click the Maintenance Mode tab.
4. Click the controller and protocol family whose settings you want to change and click the Conguration
button.
5. Make the following settings are needed:
•
ChecktheEnableboxtoenablethisprotocolfamily.
• ChecktheEnableDHCPboxtoenableaDHCPservertomakeyour
networksettings.DHCPiscurrentlysupportedinIPv4only.
• Formanualnetworksettings,typetheIP address, subnet mask, gateway
IP address
,and DNS server IP addressintotheeldsprovided.
6. Click the Sub mit button.
ManaGInG users
User management includes:
• "Viewing User Information" on page 69
• "Changing User Passwords" on page 70
• "Importing a User Database" on page 71
• "Exporting a User Database" on page 72
The Administrator or a SuperUser can perform these tasks.
vIewInG uSer InformatIon
To view user information:
1. Click the Administration tab.
2. Click the User Management icon.
The list of users displays. User information includes:
•
Username
• Status
•
Privilegelevel
• Displayname
• Emailaddress