Specifications

DS300f G2 Series User Manual
66
vIewInG fru vPD InformatIon
FRU VPD refers to Vital Product Data (VPD) information about Field Replaceable Units (FRU) in the enclosure.
The number and type of FRU depends on the subsystem model.
To view FRU VPD information:
To make Enclosure settings:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the FRU VPD button.
Use this information when communicating with Technical Support and when ordering replacement units.
Forcontactinformation,see"Contacting Technical Support" on page <?>.
vIewInG Power SuPPly StatuS
To view the status of the power supplies and the fans that cool those power supplies:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the View button.
4. Scroll down to view the power supplies.
The screen displays the operational and fan status of the power supplies. If any status differs from
normalorthefanspeedisbelowtheHealthyThresholdvalue,amalfunctionisindicatedintheStatus
column.
See "Replacing a Power Supply" on page <?>.
vIewInG coolInG unIt StatuS
To view the status of the cooling units:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the View button.
4. Scroll down to view the Blowers.
The screen displays the status and speed of the cooling units. If blower speed is below the Healthy
Threshold,amalfunctionisindicatedintheStatuscolumn.See"Diagnosing an Enclosure Problem" on
page <?>.
vIewInG temPerature SenSor StatuS
To view the status of the temperature sensors:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the View button.
4. Scroll down to view the Temperature Sensors.
IfanytemperatureexceedstheHealthyThresholdvalue,anoverheatconditionexistsintheenclosure.
See "Making Enclosure Settings" and "Diagnosing an Enclosure Problem" on page <?>.
vIewInG voltaGe SenSor StatuS
To view the status of the voltage sensors:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the View button.
4. Scroll down to view the Voltage Sensors.
IfanyvoltageisoutsidetheHealthyThresholdvalues,avoltagemalfunctionintheenclosureisindicated
in the Status column. See "Diagnosing an Enclosure Problem" on page <?>.