Specifications

DS300f G2 Series User Manual
65
vIewInG the encloSureS Summary
EnclosureManagementincludesinformation,status,settingsandlocation.ToaccessEnclosureManagement:
1. Click the Device tab.
2. Click the Component List icon.
The following information is shown:
•
EnclosureIDnumber
• Status
•
EnclosureType
• StatusDescription(speciccomponentsinneedofattention,ifany)
locatInG an encloSure
To locate an enclosure:
1. Click the Device tab.
2. Click the Component List icon.
3. ClicktheEnclosureyouwant,thenclicktheLocate button.
The enclosure LEDs blink for one minute.
vIewInG encloSure InformatIon
To view enclosure information:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the View button.
Enclosure information includes:
•
EnclosureID
• EnclosureType
• EnclosureWarning
TemperatureThreshold
• ControllerWarning
TemperatureThreshold
• MaxNumberofControllers
• MaxNumberofFans
• MaxNumberofTemperatureSensors
• MaxNumberofBatteries
• EnclosureCritical
TemperatureThreshold
• ControllerCritical
TemperatureThreshold
• MaxNumberofPhysicalDriveSlots
• MaxNumberofBlowers
• MaxNumberofPowerSupplyUnits
• MaxNumberofVoltageSensors
ForinformationonEnclosureproblems,see "Diagnosing an Enclosure Problem" on page <?>.
makInG encloSure SettInGS
To make Enclosure settings:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the Settings button.
Enclosure settings include:
•
EnclosureWarningTemperatureThreshold[51-55]°C
• EnclosureCriticalTemperatureThreshold[56-68]°C
• ControllerWarningTemperatureThreshold[71-75]°C
• ControllerCriticalTemperatureThreshold[76-80]°C
4. Intheeldprovided,typethetemperatureindegreesCforeachthresholdvalue.
5. Click the Save button.