Specifications

DS300f G2 Series User Manual
60
vIewInG controller StatIStIcS
To view controller statistics:
1. Click the Device tab.
2. Click the Component List icon.
3. Clickthecontrolleryouwant,thenclicktheView button.
4. Click the Statistics tab.
Controller statistics include:
•
DataTransferred
• ReadDataTransferred
• Errors
•
ReadErrors
• I/ORequests
• ReadIORequests
• StatisticsStartTime
• WriteDataTransferred
• Non-Read/WriteErrors
• WriteErrors
• Non-Read/WriteRequests
• WriteI/ORequests
• StatisticsCollectionTime
Note
Toclearcontrollerstatistics,see"Clearing Statistics" on page 55.
locatInG a controller
This feature causes the controller LEDs to blink for one minute to assist you in locating the controller on a RAID
subsystemorJBODexpansionunit.
To locate a controller:
1. Click the Device tab.
2. Click the Component List icon.
3. Clickthecontrolleryouwant,thenclicktheLocate button.
The controller status LEDs blink for one minute.
vIewInG the flaSh ImaGe InformatIon
To view theashimageinformationfortheRAIDsubsystemenclosure:
1. Click the Administration tab.
2. Click the Image Version icon.
3. Click the Enclosure you want to see and click the triangular button.
RAIDsubsystemshavethefollowingcomponentsintheirashimage:
• Kernel
• Firmware
• Software
• Ramdisk
•
SEPFirmware
• OEMCustomization
• BIOS
•
6GExpander
• SystemLibraries
• Applications
•
MountScripts
• PLXEEPROMImage
• Running–Theversionthatiscurrentlyrunningonthesubsystemorexpansionunit.
• Flashed–Thisversionwasupdatedbutdoesnotrununtilthesubsystemrestarts.
See Updating Firmware on a RAID Subsystem.
JBODexpansionunitshaveonlyonecomponentintheirashimage,SEPrmware.Itonlyappearsas
running.