Specifications

DS300f G2 Series User Manual
58
ShuttInG Down the SubSyStem
This function shuts down the RAID subsystem without restarting it.
To shutdown the subsystem:
1. Click the Administration tab.
2. Click the Subsystem Information icon.
3. Choose the option to apply the shutdown to the Subsystem,Controller 1 only or Controller 2 only
4. Click the Shutdown/Restart button.
5. Click the Shutdown button.
6. Typetheword“conrm”intheeldprovided.
7. Click the Conrm button.
Whenthecontrollershutsdown,yourASUSStorageManagementconnectionislost.
8. Wait at least two minutes.
Important
IfyourRAIDsubsystemmanagesJBODexpansionunits,youmustfollowtheproperstartup
procedure.
reStartInG the SubSyStem after a ShutDown
To start the RAID subsystem:
1. Press the Power button on the front left side of the device being restarted.
2. Wait at least two minutes.
3. Open your browser and log into ASUS Storage Management.
Ifyoucannotloginimmediately,wait30secondsandtryagain.
ManaGInG raId Controllers
RAID controller management includes:
• "Viewing Controller Information" on page 58
• "Making Controller Settings" on page 59
• "Locating a Controller" on page 60
• "Viewing the Flash Image Information" on page 60
• "Viewing Battery Information" on page 62
• "Reconditioning a Battery" on page 62
• "Silencing the Buzzer" on page 63
vIewInG controller InformatIon
To view controller information:
1. Click the Device tab.
2. Click the Component List icon.
3. Clickthecontrolleryouwant,thenclicktheView button.
Controller information includes:
•
ControllerID
• ReadinessStatus
• PowerOnTime
• LUNMappingmethod
• SerialNumber
• HardwareRevision
• CacheUsage–Percentage
• BootLoaderVersion
• FirmwareBuildDate
• SoftwareBuildDate
• Alias–Ifassigned*
• OperationalStatus
• SCSIProtocolSupported
• PartNumber
• WWN–WorldWideName
• DirtyCacheUsage–Percentage
• FirmwareVersion
• SoftwareVersion