Specifications

DS300f G2 Series User Manual
56
SavInG a ServIce rePort
A Service Reportis adetailed reportcoveringthecongurationandstatusofallcomponentsinyourRAID
system.Asupporttechnicianoreldengineermightrequestaservicereportforthepurposeofdiagnosisand
troubleshooting.
Tosaveasystemcongurationle:
1. Click Save Service ReportintheHeader(verytopofthewebinterface,nexttotheHelp link).
Informationforthereportisgatheredandcompiled.Thisactiontakesuptoafewminutes,depending
on the size of your RAID system
2. Click the Save Fileoption,thenclicktheSavebutton.
ThereportsavestoyourHostPCasacompressedHTMLle.
3. Double-clickthedownloadedletodecompressit.
4. Double-click the report to open it in your default browser.
The Service Report includes the following topics:
•
About–Reportutility
• BatteryInfo–Cachebackupbatteries
• BBMInfo–BadBlockManager
• BGASummary–Statusandsettings
TheServiceReportincludesthefollowingtopics,continued:
TheServiceReportincludesthefollowingtopics,continued:
• FCStatsInfo
• FlashImageVersionInfo
• iSCSIInfo
• LDAPInfo
• LogDriveInfo–Basiclogicaldriveinformation
• LogDriveDumpInfo–Diagnosticinformation
• LogicalDriveVerboseInfo–Fulllogicaldriveinformation
• LunmapInfo–LUNmaptype,LUNmaskingstatus,andLUNentries
• NetworkInfo–Virtualport
• NetworkMaintenanceInfo–Maintenancemodeports
• PhydrivInfo–Basicphysicaldriveinformation
• PhydrivVerboseInfo–Fullphysicaldriveinformation
• PDSMARTInfo–PhysicaldriveID,model,type,andSMARTstatus
• PSUWattageInfo–Enclosurepowerconsumption,powersupplyinputandoutput,andpowerontime
• SWMGTInfo–Softwaremanagement
• ServiceSetting–Email
• ServiceSetting–Netsend
• ServiceSetting–NTP
• ServiceSetting–SLP
• ServiceSetting–SNMP
• ServiceSetting–SSH
• ServiceSetting–Telnet
• ServiceSetting–Webserver
• SessionsInfo
• SpareInfo–Basicsparedriveinformation
• SpareDumpInfo–Diagnosticinformation
• SpareVerboseInfo–Fullsparedriveinformation
• StatisticInfo
• Subsysteminfo
• UPSInfo
• UserInfo
• BGASchedules–Scheduledactivities
• BuzzerInfo
• ControllerInfo
• DebugSyslog–Diagnosticinformation
• DiskArrayInfo–ID,alias,
andcapacitiesonly
• DiskArrayDumpInfo–
Diagnosticinformation
• DiskArrayVerboseInfo–All
diskarrayinformation
• EnclosureInfo
• ErrorTableInfo–Readcheck,write
check,andinconsistentblocks
• EventInfo–NVRAM–ListofNVRAMevents
• EventInfo–Runtime–List
ofRuntimeevents
• FCNodeInfo
• FCDeviceInfo
• FCInitiatorInfo
• FCPortInfo
• FCSFPInfo