Specifications

DS300f G2 Series User Manual
55
releAsing A lock set by Another user
To release somebody else’s lock:
1. Click the Administration tab.
2. Click the Subsystem Information icon.
3. Click the Lock / Unlock button.
4. Check the Force Unlock box.
5. Click the Unlock button.
reStorInG factory Default SettInGS
This feature restores settings to their default values.
Caution
Use this feature only when required and only on the settings that you must reset to
default in order to set them correctly.
To restore all settings to their default values:
1. Click the Administration tab.
2. Click the Restore Factory Default icon.
3. IntheRestorefactorydefaultsettingsscreen,check theboxesbesidethe settingsyouwantto resetto
default value:
Firmware Factory Default Settings Soware Factory Default Settings
• Background activity settings
• Controller settings
• Enclosure settings
• FC port settings
• iSCSI port settings
• Management network settings
• Physical drive settings
• Subsystem settings
• BGAschedulersettings
• Service settings
• Webserver settings
• SNMP settings
• Telnet settings
• SSH settings
• Email settings
• Netsend settings
• NTP settings
• User settings
• UPS settings
4. Click the Submit button.
5. IntheConrmationbox,typetheword“conrm”intheeldprovidedandclicktheConrmbutton.
clearInG StatIStIcS
This function clearsstatisticaldataontheRAIDcontrollers,FibreChannelports,physicaldrives,andlogical
drives.
To clear subsystem statistics:
1. Click the Administration tab.
2. Click the Subsystem Information icon.
3. Click the Clear Statistics button.
4. Typetheword“conrm”intheeldprovided.
5. Click the Conrm button.