Specifications

DS300f G2 Series User Manual
46
wIzarD - automatIc confIGuratIon
When you choose the Automatic option, the following parameters appear on the screen:
• Disk Arrays–Thenumberoflogicaldrives,numberofphysicaldrives,IDofeachphysicaldrive,congurable
capacity, and the media type (hard disk drives or solid state drives).
• Logical Drives – The ID numbers of the logical drives, their RAID levels, capacity, sector size, and stripe
size.
• Spare Drives – The ID numbers of the logical drives, type (global or dedicated) revertible option (enabled
ordisabled)andmediatype.AhotsparedriveiscreatedforallRAIDlevelsexceptRAID0,whenveor
moreunconguredphysicaldrivesareavailable
If you do NOT accept these parameters, use the Express or Advanced option to create your disk array.
If you accept these parameters, click the Submit button, and then click the Finish button.
The new disk array appears in the Disk Array List on the Storage tab, Disk Array option.
Figure 3 - 5: Automatic Conguration menu