Specifications

DS300f G2 Series User Manual
37
acceSSInG the mac aDDreSS In the clu
To access the MAC address in the CLU:
1. At the CLI command prompt, type menu and press Enter.
The CLU screen appears.
2. Highlight Network Management and press Enter.
3. Highlight IPv4 and press Enter.
The following information displays:
Active Controller Id: 1 Port Id : 1
Max Supported Speed : 1000Mbps Link Status : Up
Protocol Family : IPv4
Status : Enabled
MAC Address : 00:01:55:61:18:65
DHCP : Disabled
IP Address : 10.0.0.1
Subnet Mask : 0.0.0.0
Gateway IP Address : 0.0.0.0
DNS Server IP Address : 0.0.0.0
settInG-up asus ds300f G2 wIth the ClI
Setting up the ASUS DS300f G2 in the CLI includes these actions:
• "Making Subsystem Date and Time Settings" on page 37
• "Virtual Management Port Settings" on page 38
•
"MakingVirtualManagementPortSettings–Automatically"onpage38
• "MakingVirtualManagementPortSettings–ManuallyunderIPv4"onpage38
• "MakingVirtualManagementPortSettings–ManuallyunderIPv6"onpage38
• "Maintenance Mode Settings" on page 39
•
"MakingMaintenanceModeSettings–Automatically"onpage39
• "MakingMaintenanceModeSettings–ManuallyunderIPv4"onpage40
• "MakingMaintenanceModeSettings–ManuallyunderIPv6"onpage40
makInG SubSyStem Date anD tIme SettInGS
To set the subsystem date and time:
1. Type date -a mod -d and the date in yyyyy/mm/dd format then press Enter.
administrator@cli> date -a mod -d 2011/03/25
2. Type date -a mod -t and the time in hh:mm:ss format, then press Enter.
administrator@cli> date -a mod -t 14:50:05
You can combine date and time settings, such as:
administrator@cli> date -a mod -d 2011/03/25 -t 14:50:05