Specifications

DS300f G2 Series User Manual
242
2. ClickthearrowsortypeanewvalueinthePDORemovePeriodeldtochangetheinterval.
120secondsistheASUSStorage-recommendeddefaultvalue.
3. ClicktheApplybutton.
4. ClicktheOKbuttonintheconrmationbox.
Thenewsettingtakeseffectimmediately.
See also PathVerication.
Performance tab refreSh rate
RefreshRatereferstothenumberofsecondsbetweenrefreshesofthedatareportedonthePerformancetab.
chAnging refresh rAte settings
TochangetherefreshrateonthePerformancetab:
1. Do one of the following actions:
• ClicktheAdvancedSettings icon.
• FromtheOperationsmenu,chooseAdvanced Settings.
TheAdvancedSettingsdialogboxappearswiththeMPIOParameterstabdisplayed.
2. ClicktheGeneraltab.
3. UnderRefreshRate,clickthearrowsortypeanewvalueintheSecondseldtochangetheinterval.
5secondsisthedefaultvalue.
4. ClicktheApplybutton.
Thenewsettingtakeseffectimmediately.
See also:
• ViewingLUNPerformanceStatistics
• ViewingPathPerformanceStatistics
rounD robIn count
WhenyousetyourpathLoadBalancePolicytoRoundRobin,theI/Osfollowallactivepaths,changingpathsat
thespeciedI/Ocount.YoucansettheI/OcountintheGeneraltaboftheAdvancedSettingsdialogbox.
chAnging the round robin count
To change Round Robin Count settings:
1. Do one of the following actions:
• ClicktheAdvancedSettings icon.
• FromtheOperationsmenu,chooseSettings icon.
TheAdvancedSettingsdialogboxappearswiththeMPIOParameterstabdisplayed.
2. ClicktheGeneraltab.
3. UnderRoundRobinCount,clickthearrowsortypeanewvalueintheI/OsperPatheldtochangethe
count.
10I/Osisthedefaultvalue.
4. ClicktheApplybutton.
Thenewsettingtakeseffectimmediately.
See also:
• LoadBalancePolicy
• ViewingLUNPerformanceStatistics
• ViewingPathPerformanceStatistics
refreShInG the obJectS
UsethisfunctionaftermakinganadditionordeletiontoyourLUNsorpaths.
Torefreshtheobjects,dooneofthefollowingactions:
• FromtheOperationsmenu,chooseRefresh.
• Click the Refresh icon.
PerfectPathautomaticallydisplaysallreportedchanges.However,someactionsarenotreported.
TheRefreshactionenablesyoutoseethelatestinformation.
See also:
• AutomaticLoadBalancingforFailoverPolicy
• LoadBalancePolicy
• PathVerication
• PDORemoval