Specifications

DS300f G2 Series User Manual
221
Host interface controller has received a “clear
task set” command.
No action is required.
Host interface controller has received a “LUN
reset” command.
Host interface controller is informed that the
initiator has detected an error
If this message appears repeatedly, contact Tech
Support.
Host interface controller has received illegal
secondary identication
Host interface controller has received a
message parity error
Host interface controller has received a bus
reboot
Host interface link is up
No action is required.
Host interface link is down
Check connections.
Host interface controller has encountered an
unknown error
If this message appears repeatedly, contact Tech
Support.
Host interface controller has encountered a
system error
Host interface controller has encountered a
fatal error
Restart the ASUSDS300fG2. If this message
appears repeatedly, contact Tech Support.
Host interface controller settings have
changed
No action is required.
Host interface controller has received a
‘WARM reset’ command
If this message appears repeatedly, contact Tech
Support.
Host interface controller has received a
“COLD reset” command
Host Interface controller, MU handshake failed
Host Interface controller, HMU has stopped
Host Interface controller, FMU has unloaded
Initiator
Initiator sent message for detecting an error
If this message appears repeatedly, contact Tech
Support.
JBOD
JBOD system connected
No action is required.
JBOD system either is removed or
malfunctioned
Check Expander rmware and SAS connections.
Logical Drive
Logical drive initialization has started
No action is required.
Logical drive Initialization is in progress
Logical drive initialization has completed
Logical drive initialization has paused
Resume the initialization when ready.
Logical drive initialization has resumed
No action is required.
Logical drive initialization has stopped
If this action was not intentional, check the logical
drive’s status.
Logical drive initialization marks the logical
drive ofine
Replace the failed physical drive. Delete and recreate
the logical drive.
Logical drive initialization is aborted due to an
internal error.
Reduce system load on the ASUSDS300fG2.
Logical drive initialization is queued
No action is required.
Quick logical drive initialization has started
Quick logical drive initialization has
completed
Quick logical drive initialization has paused
Resume the initialization when ready.
Quick logical drive initialization has resumed
No action is required.
Quick logical drive initialization has stopped
If this action was not intentional, check the logical
drive’s status.
Quick logical drive initialization marks the
logical drive ofine
Replace the failed physical drive. Delete and recreate
the logical drive.
Quick logical drive Initialization is aborted due
to an internal error
Reduce system load on the ASUSDS300fG2.
Quick logical drive initialization is queued
No action is required.
A new logical drive has been created
Logical drive has been deleted
Logical drive has been placed online
Logical drive has been placed online. Possible
data loss
Check the state of the physical drives, replace any bad
drives. Rebuild logical drive.
Logical drive has been set to critical.
Logical drive has been set to degrade
Rebuild marks the logical drive synchronized
upon rebuild completion
No action is required.
Logical drive settings has been changed
through a user command
One of the error
tables of a logical drive has
been cleared by the user
Logical drive axle has been placed online
Media Patrol
Media patrol is started
No action is required.
Media patrol is in progress
Media patrol is completed
Media patrol is paused
Resume Media Patrol when ready.
Media patrol is resumed
No action is required.
Media patrol is stopped
If this action was not intentional, check the logical
drive’s status.
Media patrol is aborted due to an internal
error.
Reduce system load on the ASUSDS300fG2.
Media patrol is queued
No action is required.
Media patrol is stopped internally
Online Capacity Expansion
Online capacity expansion has started
No action is required.
Online capacity expansion has completed
Online capacity expansion has paused
Resume OCE when ready.
Online capacity expansion has resumed
No action is required.