Specifications

DS300f G2 Series User Manual
201
Chapter 8: troubleshootInG
This chapter contains the following topics:
• ASUS DS300f G2 is Beeping (below)
• LEDs Display Amber or Red (page 202)
• CLU Reports a Problem (page 206)
• ASUS Storage Management Reports a Problem (page 208)
• USB Support Reports a Problem (page 209)
• "Enclosure Problems" on page 209
• "RAID Controller Problems" on page 211
• "Disk Array and Logical Drive Problems" on page 213
• "Physical Drive Problems" on page 213
• "Connection Problems" on page 216
• "Power Cycling the Subsystem" on page 218
• "EventNoticationResponse"onpage218
asus ds300f G2 Is beepInG
ASUS DS300f G2’s alarmhasvedifferentpatterns.
Whenyourstpower-uptheASUSDS300fG2,itbeepstwicetoshownormaloperation.
TheaudiblealarmsoundsatothertimestoinformyouthattheASUSDS300fG2needsattention.Butthealarm
doesnotspecifythecondition.
When the alarm sounds:
• CheckthefrontandbackofASUSDS300fG2enclosureforredoramberLEDs.
• Ifemailnoticationisenabled,checkfornewmessages.
• Check for yellow ! red X icons.
• Checktheeventlog.
See "Viewing Runtime Events" on page 206 and "Viewing NVRAM Events" on page 207.
Whenacontinuoustonesounds,therearemultiplealarmpatternssoundingatthesametime.
SIlencInG the buzzer
Caution
This action disables the buzzer for all events.
To silence the buzzer:
1. Click the
Devicetab.
2. Click the Component Listicon.
3. Click the Buzzer and click the Settingsbutton.
4. Uncheck the Enable Buzzer box.
5. Click the Savebutton.