Specifications

DS300f G2 Series User Manual
177
InStallInG a new Power SuPPlyt
To install the power supply:
1. Carefully slide the power supply into the enclosure.
2. Turn the set screw clockwise to tighten, DO NOT over tighten.
3. Plug in the power cord.
4. Switch on the power supply.
5. Verify that the new power supply LED is green. See Power supply for ASUS DS300f G2
Figure 6 - 3: Insert fresh PSU
replaCInG a power supply
The power supply and its fans are replaced as one unit. There are no individually serviceable parts. No tools are
required for this procedure.
removInG the olD Power SuPPly
To remove the power supply:
1. Verify that the PSU status LED is amber or red.
2. Unplug the power cord.
3. Turn the set screw counter-clockwise to loosen it. The screw is retained on the power supply housing.
4. Grasp the handle and pull the power supply straight out of the enclosure.
Figure 6 - 2: Power supply for ASUS DS300f G2
Handle