Specifications

DS300f G2 Series User Manual
175
restart. No reconnect is required.
fAiled uPdAte
Ifthermwareupdatefails,thecontrollerstatusLEDdisplaysred.SeeASUS DS300f G2 controller LEDs, ASUS
DS300f G2 controller LEDs
1. RemovetheUSBashdevice.
2. InserttheUSBashdeviceintoaUSBportonyourPC.
3. Go to the OPAX_xxxxxx folder to obtain the report and log.
Possible causes for an update failure include:
• Less than 50 MB free space on the USB ash device.
• The ASUS DS300f G2 rmware image is invalid.
• A background activity is running.
See "Contacting Technical Support" on page <?>.
updatInG physICal drIve fIrMware
This feature applies only to ASUS Storage-supported physical drives. For a list of supported drives, go to ASUS
Storage support: http://www.ASUS Storage.com/support/.
IfyouhavephysicaldrivesinyourRAIDsystem thatarenotASUSStorage-supported,followthermware
update procedure from the drive manufacturer.
aSuS StoraGe manaGement
DownloadthelatestrmwareimagelefromASUSStoragesupport:
http://www.ASUS Storage.com/support/ and save it to your Host PC or TFTP server.
ToupdatethermwareonASUSStorage-supportedphysicaldrives:
1. Click the Administration tab.
2. Click the Firmware Update icon.
3. Click the PD Firmware Update tab.
4. Choose a download option:
•
LocalFilethroughHTTP – Click the Browse button, locate the rmware
image le, click the le to choose it, then click the Open button.
•
TFTPServer – Enter the TFTP Server host name or IP address, port number and le name.
5. Click the Next button.
6. Click the Submit button.
The progress of the update displays.
Warning
DoNOTpowerofftheRAIDsubsystemduringtheupdate!
DoNOTmovetoanyotherscreenuntilthermwareupdateoperationis
completed!
When the update is completed a message tells you to reboot the subsystem.
7. Click the OK button.
Restart the RAID subsystem. See “Restarting a Subsystem” on the next page.