Specifications

DS300f G2 Series User Manual
171
reStartInG aSuS DS300f G2 – SSh connectIon
To restart the RAID subsystem:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Shutdown or Restart and press Enter.
3. Highlight Option and press the spacebar to display Restart.
4. Highlight Submit and press Enter.
A warning message appears.
5. Press Y to continue.
6. Close your SSH session.
7. Wait about two minutes.
8. Re-establish your SSH connection to the ASUS DS300f G2 CLU.
See Making a SSH Connection.
If you cannot re-establish a connection, wait 30 seconds and try again.
reStartInG aSuS DS300f G2 – SerIal connectIon
To restart the RAID subsystem:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Shutdown or Restart and press Enter.
3. Highlight Option and press the spacebar to display Restart.
4. Highlight Submit and press Enter.
A warning message appears.
5. Press Y to continue.
The screen displays shutdown and startup functions.
6. When the Login: prompt appears, log into the CLU again.
buzzer
makInG buzzer SettInGS
The buzzer sounds to inform you that the ASUS DS300f G2 needs attention. See "ASUS DS300f G2 is Beeping"
on page <?> for more information.
To make buzzer settings:
1. From the Main Menu, highlight Buzzer and press Enter.
A list of Controllers appears with the current buzzer setting and status.
2. Highlight the Controller whose buzzer you want to set and press Enter.
3. Highlight Enabled and press the spacebar to toggle between Yes and No.
4. Press Control-A to save your settings.
SIlencInG the buzzer
Caution
This action disables the buzzer for all events.
To silence the buzzer, follow the procedure above for disabling the buzzer.