Specifications

DS300f G2 Series User Manual
169
5. Highlight Submit and press Enter.
A warning message appears.
6. Press Y to continue.
7. The subsystem will then turn off the system power one after another.
startInG up after shutdown
There are two methods for shutting down the subsystem. Choose one of the following procedures:
• "Starting up the ASUS DS300f G2 – Telnet Connection" on page 169
• "Starting up the ASUS DS300f G2 – SSH Connection" on page 169
• "Starting up the ASUS DS300f G2 – Serial Connection" on page 170
StartInG uP the aSuS DS300f G2 – telnet connectIon
To start the RAID subsystem:
1. Manually turn on the system by pressing the power button on the front left side.
2. Wait about two minutes.
3. Establish a Telnet connection to the ASUS DS300f G2.
See Making a Telnet Connection.
If you cannot log in, wait 30 seconds and try again.
4. Type menu and press Enter to open the CLU.
StartInG uP the aSuS DS300f G2 – SSh connectIon
To start the RAID subsystem:
1. Manually turn on the system by pressing the power button on the front left side.
2. Wait about two minutes.
3. Establish a SSH connection to the ASUS DS300f G2.
See Making a SSH Connection.
If you cannot log in, wait 30 seconds and try again.
4. Type menu and press Enter to open the CLU.