Specifications

DS300f G2 Series User Manual
168
shuttInG down the subsysteM (Clu)
There are two methods for shutting down the subsystem. Choose one of the following procedures:
• "Shutting down the ASUS DS300f G2 – Telnet Connection" on page 168
• "Shutting down the ASUS DS300f G2 – Serial Connection" on page 168
ShuttInG Down the aSuS DS300f G2 – telnet connectIon
This function shuts down the ASUS DS300f G2 subsystem on a Telnet connection. Additional action is required,
as described below.
Important
IfyouhaveaJBODExpansion,alwayspowerofftheRAIDsubsystemrst.Thenpower
off the JBOD subsystems.
To shutdown the RAID subsystem:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Shutdown or Restart and press Enter.
3. Highlight Option and press the spacebar to display Shutdown.
4. Highlight Submit and press Enter.
A warning message appears.
5. Press Y to continue.
The screen goes blank.
6. Wait for no less than two minutes.
7. The subsystem will then turn off the system power one after another.
ShuttInG Down the aSuS DS300f G2 – SSh connectIon
This function shuts down the ASUS DS300f G2 subsystem on a SSH connection. Additional action is required,
as described below.
Important
IfyouhaveaJBODExpansion,alwayspowerofftheRAIDsubsystemrst.Thenpoweroffthe
JBOD subsystems.
To shutdown the RAID subsystem:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Shutdown or Restart and press Enter.
3. Highlight Option and press the spacebar to display Shutdown.
4. Highlight Submit and press Enter.
A warning message appears.
5. Press Y to continue.
6. Close your SSH session.
7. Wait for no less than two minutes.
8. The subsystem will then turn off the system power one after another.
ShuttInG Down the aSuS DS300f G2 – SerIal connectIon
This function shuts down the ASUS DS300f G2 subsystem on a serial connection. Additional action is required,
as described below.
Important
IfyouhaveaJBODExpansion,alwayspowerofftheRAIDsubsystemrst.Thenpoweroff
the JBOD subsystems.
To shutdown the RAID subsystem:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Shutdown or Restart and press Enter.
3. Highlight Shutdown or Restart and press Enter.
4. Highlight Option and press the spacebar to display Shutdown.