Specifications

DS300f G2 Series User Manual
164
makInG telnet SettInGS (clu)
By default, Telnet service is set to Manual and its normal status is Stopped.
To make Telnet service settings:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Software Management and press Enter.
3. Highlight Telnet and press Enter.
4. Highlight Startup Type and press the spacebar to toggle between Automatic and Manual.
5. Highlight the following and press the backspace key to erase the current value, then type the new value:
•
Portnumber(2300isthedefault)
• SessionTimeOut(24minutesisthedefault.1440minutes=24hours)
• Maximumnumberofconnections(4isthedefault)
6. Press Control-A to save your settings.
To start, stop or restart the Telnet service, highlight Start, Stop, or Restart and press Enter.
makInG SSh SettInGS (clu)
By default, Secure Shell (SSH) service is set to Automatic and its normal status is Started.
To make SSH settings:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Software Management and press Enter.
3. Highlight SSH and press Enter.
4. Highlight Startup Type and press the spacebar to toggle between Automatic and Manual.
5. Highlight the following and press the backspace key to erase the current value, then type the new value:
•
Portnumber(22isthedefault)
• SessionTimeOut(24minutesisthedefault.1440minutes=24hours)
• Maximumnumberofconnections(4isthedefault)
6. Press Control-A to save your settings.
makInG SnmP SettInGS (clu)
By default, Simple Network Management Protocol (SNMP) service is set to Automatic and its normal status is
Started.
To make SNMP service settings:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Software Management and press Enter.
3. Highlight SNMP and press Enter.
4. Highlight Startup Type and press the spacebar to toggle between Automatic and Manual.
5. Highlight the following and press the backspace key to erase the current value, then type the new value:
•
Port Number–161isthedefault
• System Name–(optional)Typeasystemnameinthiseld
• System Location –Typeacountrynameinthiseld
• System Contact–Typetheemailaddressofyoursystemadministratorinthiseld
• Read Community–Typeacommunitynameinthiseld
• Write Community –private(nochangepossible)
6. Press Control-A to save your settings.
To start, stop or restart the SNMP service, highlight Start, Stop, or Restart and press Enter.
manaGInG SnmP traP SInkS (clu)
viewing A list of trAP sinks
To create a trap sink:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight Software Management and press Enter.
3. Highlight SNMP and press Enter.
4. Highlight Trap Sinks and press Enter.
A list of the current trap sinks appears.