Specifications

DS300f G2 Series User Manual
157
DeletInG an InItIator (clu)
Caution
If you delete an initiator, you delete the LUN map associated with that initiator.
Verify that the LUN map is no longer needed before deleting the initiator
To delete an initiator:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight the initiator you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.
4. Highlight Delete Marked Initiators and press Enter.
5. PressYtoconrmthedeletion.
vIewInG a lISt of lun maPS (clu)
To view a list of LUN maps:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
3. Do one of the following actions:
•
HighlightLUN Mapping: InitiatorsandpressEnter.ThenhighlightaninitiatorandpressEnter.
The list of logical drives with corresponding LUN maps appears.
aDDInG a lun maP (clu)
For FC & iSCSI systems, you can set up an Initiator LUN map.
You can set up the LUN map type on the same subsystem but only one LUN map type can be active at a time.
A maximum of 256 logical drives can be mapped to an FC initiator or to an iSCSI initiator.
ToassignaLUNtoanFCoriSCSIinitiator,addtheinitiatorrst.SeeAdding an Initiator (CLU).
LUN mapping must be enabled in order to map a LUN. See Enabling LUN Mapping (CLU).
MAPPing A lun to An fc initiAtor
To map a LUN to an FC initiator:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
3. Do the following actions:
•
HighlightLUN Mapping: InitiatorsandpressEnter.ThenhighlightaninitiatorandpressEnter.
A list of logical drives displays.
4. IntheLUNeld,pressthebackspacekeytoerasethecurrentvalue,thentypetheLUNyouwanttoassign
to this initiator, from 0 to 255.
Each logical drive can have only one LUN and must have a unique LUN.
If you make a error, press Control-AR to restore the current LUN.
5. Press Control-A to save the LUN map.