Specifications

DS300f G2 Series User Manual
155
workInG wIth the event vIewer (Clu)
Working with the Event Viewer includes the following functions:
• "Viewing Runtime Events (CLU)" on page 155
• "Clearing Runtime Events (CLU)" on page 155
• "Viewing NVRAM Events (CLU)" on page 155
• "Clearing NVRAM Events (CLU)" on page 155
TheEventViewerdisplayslogofsubsystemevents.Eventsareclassiedas:
• Runtime Events – A list of and information about the 1023 most recent runtime events recorded since the
subsystem was started
• NVRAM Events – A list of and information about the most important events over multiple subsystem
startups. NVRAM events are stored in non-volatile memory
Event Severity Levels
Level Description
Fatal
Non-recoverableerrororfailurehasoccurred.
Critical Actionisneedednowandtheimplicationsoftheconditionareserious.
Major Actionisneedednow.
Minor Actionisneededbuttheconditionisnotaseriousatthistime.
Warning Usercandecidewhetherornotactionisrequired.
Information Informationonly,noactionisrequired.
vIewInG runtIme eventS (clu)
To display Runtime Events:
1. From the Main Menu, highlight Event Viewer and press Enter.
The log of Runtime Events appears. Events are added to the top of the list. Each item includes:
• Sequence number
–Beginswith0atsystemstartup.
• Device–DiskArray,LogicalDrive,PhysicalDrivebyitsIDnumber.
• Severity–Seethetableabove.
• Timestamp–Dateandtimetheeventhappened.
• Description–Adescriptionoftheeventinplainlanguage.
2. Press the up and down arrow keys to scroll through the log.
clearInG runtIme eventS (clu)
To clear the Runtime Event log:
1. From the Main Menu, highlight Event Viewer and press Enter.
2. Highlight Clear Runtime Event Log and press Enter.
3. PressYtoconrm.
vIewInG nvram eventS (clu)
This screen displays a list of and information about the most important events over multiple subsystem startups.
To display NVRAM events:
1. From the Main Menu, highlight Event Viewer and press Enter.
2. Highlight NVRAM Events and press Enter.
The log of NVRAM Events appears. Events are added to the top of the list. Each item includes:
• Sequence number
–Beginswith0atsystemstartup.
• Device–DiskArray,LogicalDrive,PhysicalDrivebyitsIDnumber.
• Severity–Seethetableonthepreviouspage.
• Timestamp–Dateandtimetheeventhappened.
• Description–Adescriptionoftheeventinplainlanguage.
3. Press the up and down arrow keys to scroll through the log.
clearInG nvram eventS (clu)
To clear the Runtime Event log:
1. From the Main Menu, highlight Event Viewer and press Enter.
2. Highlight NVRAM Events and press Enter.
3. Highlight Clear NVRAM Event Log and press Enter.
4. PressYtoconrm.