Specifications

DS300f G2 Series User Manual
153
• HighlightPing Through Controller IDandchooseacontroller(1or2)
• HighlightPing Through Port IDandchooseaportnumber(1to4)
To change a value, highlight the item, press Backspace to delete the current value and type a new value.
4. Highlight Ping and press Enter.
The results of the ping are displayed on the iSCSI Ping screen.
vIewInG a lISt of IScSI trunkS (clu)
A trunk is the aggregation of two or more iSCSI ports to increase bandwidth.
To view a list of iSCSI trunks:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight Trunk and press Enter.
The list of iSCSI Trunks displays.
• ID
–IDnumberofthetrunk.Startsat1.
• CtrlId–RAIDcontrollerID,1or2
• Master Port–OneofthefourphysicalportsontheRAIDcontroller
• Slave Ports–AnyoralloftheremainingphysicalportsonthesameRAIDcontroller
• Failed Ports–AslaveportthathasnoiSCSIdataconnection.
• State–Optimal,Sub-OptimalorFailed.IdentifyandcorrectthefailediSCSIports.
aDDInG IScSI trunkS (clu)
Ports must be enabled to add them to a trunk. See "Making iSCSI Port Settings (CLU)" on page 148. ASUS
DS300f G2 supports a maximum of eight trunks.
YoucannotuseaniSCSIportthathasportalsconguredtoit.See"Viewing a List of iSCSI Portals (CLU)" on
page 148 and "Deleting iSCSI Portals (CLU)" on page 150.
To add an iSCSI Trunk:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight Trunk and press Enter.
3. Highlight Create New Trunk and press Enter.
4. Enter information as required:
•
Highlight Controllerandtypethecontrolleryouwant(1or2).
• HighlightMaster Portandtypetheportnumberyouwant(1to4).
• HighlightSlave Portsandtypetheportnumberyouwant.
Formultipleports,separatethenumberswithacomma.
YoucanchooseanyorallportnumbersexcepttheMasterPortnumber.
5. Highlight Save Trunk and press Enter.
The new trunk appears in the list.
You can add up to 8 trunks. After you add a trunk, you can assign it to a portal. See"Adding iSCSI Portals
(CLU)" on page 149.
makInG IScSI trunk SettInGS (clu)
To make trunk settings:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight Trunk and press Enter.
3. Highlight the trunk you want and press Enter.
4. Enter information as required:
•
Highlight Controllerandtypethecontrolleryouwant(1or2).
• HighlightMaster Portandtypetheportnumberyouwant(1to4).
• HighlightSlave Portsandtypetheportnumberyouwant.
Formultipleports,separatethenumberswithacomma.
YoucanchooseanyorallportnumbersexcepttheMasterPortnumber.
5. Highlight Save Settings and press Enter.
DeletInG IScSI trunkS (clu)
Beforeyoucandeleteatrunk,youmustdeleteanyportalsconguredonit.See"Deleting iSCSI Portals (CLU)"
on page 150.
To delete an iSCSI trunk:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight Trunk and press Enter.
3. Highlight the trunk you want to delete and press the Spacebar to mark it.
4. Highlight Delete Marked Trunks and press Enter.
5. PressYtoconrm.