Specifications

DS300f G2 Series User Manual
152
vIewInG a lISt of IScSI chaPS (clu)
Challenge Handshake Authentication Protocol (CHAP) is an authentication mechanism used to authenticate
iSCSI sessions between initiators and targets.
To view a list of iSCSI CHAPs:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI CHAPs and press Enter.
A list of the current CHAPs appears. Information includes:
• ID
–IDnumber.Numberingstartsat0.
• Type–Peerisone-way.Localisbi-directional.
• Name–CHAPname.
aDDInG IScSI chaPS (clu)
Verify that CHAP authentication is enabled under Making iSCSI Target Settings (CLU)0.
To add an iSCSI CHAP:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI CHAPs and press Enter.
3. Highlight Create New CHAP Entry and press Enter.
4. Highlight Name and type a name for the CHAP.
5. Highlight Type and press the spacebar to toggle between Peer and Local.
Peer is one-way. Local is bi-directional.
6. Highlight Secret and type a secret of 12 to 16 characters.
7. Highlight Retype Secret and type the secret again to verify.
8. Highlight Save CHAP Record and press Enter.
The new CHAP is added to the list.
makInG IScSI chaP SettInGS (clu)
When you change CHAP settings, you must change the secret. You cannot change the type (peer or local).
To make iSCSI CHAP settings:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI CHAPs and press Enter.
3. Highlight the CHAP you want to edit and press Enter.
4. Make changes as needed.
•
HighlightNameandpressthebackspacekeytoerasethecurrentvalue,thentypethenewvalue.
• HighlightNew Secretandtypeasecretof12to16characters.
• HighlightRetype New Secretandtypethesecretagaintoverify.
5. Highlight Save CHAP Record and press Enter.
The edited CHAP appears in the list.
DeletInG IScSI chaPS (clu)
To delete an iSCSI CHAP:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI CHAPs and press Enter.
3. Highlight the CHAP you want to delete and press Enter to mark it.
4. Highlight Delete Marked Entries and press Enter.
5. PressYtoconrmthedeletion.
PInGInG a hoSt or Server on the IScSI network (clu)
This function enables you to ping other network nodes through any one of the ASUS DS300f G2’s iSCSI ports.
To ping a host or server on the network:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight Ping and press Enter.
3. Enter information as required:
•
Highlight IP address andtypetheIPaddressyouwanttoping.
• HighlightPacket Count andenterthenumberofpacketsyouwanttosend.