Specifications

DS300f G2 Series User Manual
151
vIewInG IScSI SeSSIon InformatIon (clu)
To view a list of iSCSI sessions:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Sessions and press Enter.
3. Highlight the session you want and press Enter.
iSCSI session information includes:
• Session ID–IDnumberofthesession
• Status–Activeorinactive
• Initiator Name–SCSIqualiedname(iqn)
• Portal IP–IPaddressoftheportal
• Device Type–Initiatorortarget
• Target Portal Group–IDnumber
• TSIH–Targetsessionidentifyinghandle
• Execution Throttle–Maxnumberof
outstandingcommandsonanyoneport
• Max Rcv Data Seg Length–Receivedata
segmentlength
• First Burst Length–Inbytes
• Default Time to Wait–Inseconds
• Immediate Data–Enabledordisabled
• Header Digest–Enabledordisabled
• CHAP Authentication Type –None,Local,
Peer
• Portal ID–IDnumberoftheportal
• Target Alias
• Target Name–iSCSIqualiedname(iqn)
• Initiator IP–IPaddressoftheinitiator
• Initiator Source Port–IDnumber
• ISID–InitiatorsessionIDnumber
• Max Outstanding R2T–NumberofPDUs
readytotransfer
• Max Burst Length–Inbytes
• Default Time to Retain–Inseconds
• Initial R2T–Enabledordisabled
• Data Digest –Enabledordisabled
• Data PDU in Order–Enabledordisabled
• Data Seq in Order–Enabledordisabled
• Device Access Control–Enabledordisabled
vIewInG IScSI ISnS InformatIon (clu)
Internet Storage Name Service (iSNS) is a protocol used to facilitate the automated discovery, management,
andcongurationofiSCSIandFibreChanneldevicesonaTCP/IPnetwork.
To view iSNS information:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI iSNS Options and press Enter.
The current iSNS options appear. Information includes:
• iSNS
–Enabledordisabled
• iSNSIPAddress–IPaddressoftheiSNSserver
• iSNSPort–iSNSportnumber(1to65535)3205isthedefaultandrecommendednumber
Items marked with an asterisk (*) are adjustable under Making iSCSI Portal Settings (CLU).
makInG IScSI ISnS SettInGS (clu)
To make iSNS settings:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI iSNS Options and press Enter.
The current iSNS options appear.
3. Highlight iSNS Settings and press Enter.
4. Highlight iSNS and press the Spacebar to toggle between Enable and Disable.
5. If you chose Enable:
•
EnteranIPaddress.
• EnteraPortnumber.3205isthedefaultandrecommendednumber.
To change a value, highlight the item, press Backspace to delete the current value and type a new value.
6. Highlight Save Settings and press Enter.
7. Press Y to acknowledge possible interruption of iSCSI services.
8. PressYagaintoconrmthechanges.
9. Highlight Return to Previous Menu and press Enter to return to the portal list.