Specifications

DS300f G2 Series User Manual
143
5. Highlight each of the following and press the backspace key to erase the current value, then type the new
value.
•
IP Address
• Subnet Mask
• Default Gateway IP Address
• DNS Server IP Address
6. Press Control-A to save your settings.
makInG maIntenance moDe SettInGS (clu)
Each controller has its own IP addresses for access when the controller goes into maintenance mode. For more
information, see "Maintenance Mode" on page <?>.
Before you change settings, please see “About IP Addresses” on page 36.
MAking AutoMAtic settings
1. From the Main Menu, highlight Network Management and press Enter.
2. Highlight MaintenanceModeNetworkConguration and press Enter.
3. Highlight the controller (CId 1 or 2) and protocol family (IPv4 or IPv6) you want and press Enter.
4. Highlight DHCP and press the spacebar to toggle to Enabled.
5. Press Control-A to save your settings.
MAking MAnuAl settings
1. From the Main Menu, highlight Network Management and press Enter.
2. Highlight MaintenanceModeNetworkConguration and press Enter.
3. Highlight the controller (CId 1 or 2) and protocol family (IPv4 or IPv6) you want and press Enter.
4. Highlight DHCP and press the spacebar to toggle to Disabled.
5. Highlight each of the following and press the backspace key to erase the current value, then type the new
value.
•
IP Address
• Subnet Mask
• Default Gateway IP Address
• DNS Server IP Address
6. Press Control-A to save your settings.
ManaGInG fIbre Channel ConneCtIons (Clu)
The Fibre Channel Management option appears only with ASUS DS300f G2 Fibre Channel models. Fibre Channel
Management includes the following functions:
• "Viewing Node Information (CLU)" on page 143
• "Viewing Fibre Channel Port Information" on page 143
• "Making Fibre Channel Port Settings (CLU)" on page 144
• "Viewing Fibre Channel Port Statistics (CLU)" on page 144
• "Viewing SFP Information (CLU)" on page 144
• "Viewing Fibre Channel Initiators (CLU)" on page 145
Also see: "Adding an FC Initiator" on page <?> and "Deleting an FC Initiator" on page <?>
vIewInG noDe InformatIon (clu)
These functions affect both ASUS DS300f G2 Fibre Channel ports.
1. From the Main Menu, highlight Fibre Channel Management and press Enter.
2. Highlight Fibre Channel Node and press Enter.
Node information appears. There are no user settings on this screen.
vIewInG fIbre channel Port InformatIon
To view Fibre Channel port information:
1. From the Main Menu, highlight Fibre Channel Management and press Enter.
2. Highlight Fibre Channel Ports and press Enter.
Highlight the port you want and press Enter.