Specifications

DS300f G2 Series User Manual
123
releAsing the lock
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Lock Management and press Enter.
3. Highlight Unlock and press Enter.
releAsing A lock set by Another user
To release somebody else’s lock:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Lock Management and press Enter.
3. Highlight Force Unlock and press the Spacebar to change to Yes.
4. Highlight Unlock and press Enter.
SettInG SubSyStem Date anD tIme (clu)
Use this screen to make Date and Time settings:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Modify System Date & Time and press Enter.
3. Highlight the System Date or System Time setting.
4. Press the backspace key to erase the current value.
5. Type in a new value.
6. Press Control-A to save your settings.
makInG ntP SettInGS (clu)
After you have made Network Time Protocol (NTP) settings, the ASUS DS300f G2 subsystem synchronizes with
a NTP server.
• At startup
• Every night
• When you synchronize manually
To make NTP settings for the subsystem:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight NTP Management and press Enter.
3. Highlight NTP Settings and press Enter.
4. Make the following settings as required:
•
HighlightNTP ServiceandpressthespacebartotogglebetweenEnabledandDisabled.
•
HighlightTime Server (1),Time Server (2),orTime Server (3)andtypeaservername.
Example: 0.us.pool.ntp.org
You can have up to 3 NTP servers.
•
HighlightTime ZoneandpressthespacebartotogglethroughGMT,GMT+,andGMT-.
ForGMT+andGMT-,typethehourfrom0:00to13:00GMTforyourtimezone.
• HighlightDaylight Savings TimeandpressthespacebartotogglebetweenEnableandDisable.
IfDaylightSavingsTimeisEnabled,highlighttheStart MonthandEnd Monthandenteranumberfrom
1to12.
ThenhighlighttheWeekandDayandtoggletomakeyourchoices.
5. Press Control-A to save your settings.
Notes
TheNTPservernameshownisanexampleonly.YoumustndandenteryourlocalNTPservername.
GMTistheolderdesignationforUTC.
SynchronIzInG wIth a ntP Server (clu)
The ASUS DS300f G2 subsystem automatically synchronizes with a NTP server every night and a startup. You
have the option of synchronizing manually at any time.
To manually synchronize the ASUS DS300f G2 with a NTP server:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight NTP Management and press Enter.
3. Highlight Start Time Sync and press Enter.
4. PressYtoconrm.
To verify, check Last Synchronization Time and Last Synchronization Result.