Specifications

DS300f G2 Series User Manual
117
PInGInG a hoSt or Server on the IScSI network
ThisfunctionenablesyoutopingothernetworknodesthroughanyoneoftheASUSDS300fG2’siSCSIports.
To ping a host or server on the network:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Ping tab.
4. TypetheIPaddressofthehostorserverintotheIPAddresseld.
5. Choose the port Type from the drop-down menu.
•
iSCSImeansaniSCSIport
• MgmtmeanstheASUSDS300fG2’svirtualmanagementport
6. IfyouchoseiSCSIport,choosetheRAIDcontrollerandportnumberfromthedrop-downmenus.
7. Type the number of packets you want to send in the NumberofPacketstoPingeld.
Four packets are commonly used for a ping.
8. Click the Start button.
Inafewmoments,theresultdisplaysundertheDevice tab as
Ping succeeded or Ping failed.