Specifications

DS300f G2 Series User Manual
115
Information includes:
• SessionID–IDnumberofthesession
• Status–Activeorinactive
• TargetAlias
• InitiatorName–iSCSIqualiedname(iqn)
• PortalIP–IPaddressoftheportal
• DeviceType–Initiatorortarget
• TargetPortalGroup–IDnumber
• TSIH–Targetsessionidentifyinghandle
• ExecutionThrottle–Maxnumberof
outstandingcommandsonanyoneport
• MaxOutstandingR2T–NumberofPDUs
readytotransfer
• DefaultTimetoRetain–Inseconds
• MaxBurstLength–Inbytes
• InitialR2T–Enabledordisabled
• DataDigest–Enabledordisabled
• DataPDUinOrder–Enabledordisabled
• PortalID–IDnumberoftheportal
• KeepAlive–Enabledordisabled
• TargetName–iSCSIqualiedname(iqn)
• InitiatorIP–IPaddressoftheinitiator
• DeviceAccessControl–Enabledordisabled
• InitiatorSourcePort–IDnumber
• ISID–InitiatorsessionIDnumber
• MaxRcvDataSegLength–Receivedatasegment
length
• FirstBurstLength–Inbytes
• DefaultTimetoWait–Inseconds
• ImmediateData–Enabledordisabled
• HeaderDigest–Enabledordisabled
• CHAPAuthenticationType–None,Local,Peer
• DataSeqinOrder–Enabledordisabled
DeletInG an IScSI SeSSIon
To delete an iSCSI session:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Session tab.
4. Click the iSCSI session you want and click the Delete button.
5. Type“conrm”intheeldprovided,thenclicktheConrm button.
vIewInG IScSI ISnS InformatIon
To view information about iSNS:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the iSNS tab.
The information includes:
•
AutoiSNSIP–YesmeanstheIPaddressisassignedautomatically
• iSNSEnabled–YesmeanstheiSNSfeatureisenabled*
• iSNSServerIPAddress–IPaddressoftheiSNSServer*
• iSNSPort–3205isthedefaultandrecommendedvalue*
Items marked with an asterisk (*) are adjustable under Making iSCSI iSNS Settings.
makInG IScSI ISnS SettInGS
To make iSNS settings:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the iSNS tab.
4. Click the iSNS Settings button.
5. Make settings changes are required:
•
ChecktheboxtoenableiSNS.Unchecktodisable.
• EntertheiSNSserverIPaddress.
• EnteranewiSNSPortnumber.Therangeis1to65535.
6. Click the Submit button.