Specifications

DS300f G2 Series User Manual
114
6. Click the Submit button.
The new trunk is added to the list.
Specify the trunk when your create a portal. See "Adding iSCSI Portals"
makInG IScSI trunk SettInGS
To make trunk settings:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Trunk tab.
4. Clickthetrunkyouwant,thenclicktheSettings button.
5. Make changes as required:
•
ControllerID–IDoftheRAIDcontroller,1or2
• MasterPortnumber–IDofthemasterport
• SlavePortnumber–IDstheslaveports
6. Click the Submit button.
DeletInG IScSI trunkS
Beforeyoucandeleteatrunk,youmustdeleteanyportalsconguredonit.See"Deleting iSCSI Portals" on
page 112.
To delete an iSCSI trunk:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Trunk tab.
4. Clickthetrunkyouwant,thenclicktheDelete button.
5. In the Conrmationbox,typetheword“conrm”intheeldprovidedandclicktheConrm button.
The trunk is removed from the list.
vIewInG a lISt of IScSI SeSSIonS
To view a list of iSCSI sessions:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Session tab.
iSCSI session information includes:
• ID
–IDnumberofthesession
• TargetName–Aliasofthetarget
• InitiatorName–PartoftheIQN
• PortalID–IDnumberoftheportal
• Status–Activeorinactive.
vIewInG IScSI SeSSIon InformatIon
To view a list of iSCSI sessions:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Session tab.
4. Click the iSCSI session you want and click the View button.