Specifications

DS300f G2 Series User Manual
112
To add a portal:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Portal tab.
4. Click the Create Portal button.
5. Make your choices and inputs as required:
•
ChooseanAssociationtypefromtheoptionlist.
ThechoicesarePHY or Trunk,
•
IfyouarecreatingaPHYassociation,choose
• ControllerID(1or2)fromthedrop-downmenu.
• ChooseaPortID(1to4)fromthedrop-downmenu.
• IfyouwanttouseVLAN,click enableVLAN andllaVLANtagfrom(1to4094).
• IfyouarecreatingaTrunkassociation,chooseaTrunkID(1to8)fromthedrop-downmenu.
• TypetheIPaddressoftheportalintheeldprovided.
• Typethesubnetmaskoftheportalintheeldprovided.
• TypethegatewayIPaddressoftheportalintheeldprovided.
• FromtheIPTypedrop-downmenu,chooseIPv4orIPv6.
DHCPiscurrentlysupportedonlyforIPv4.
6. Click the Submit button.
The new portal is added to the list.
Toassignaportaltoatarget,see"AssigningaPortaltoaniSCSITarget"
makInG IScSI Portal SettInGS
To make iSCSI portal settings:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Portal tab.
4. Clicktheportalyouwant,thenclicktheSettings button.
5. Make settings changes as needed:
•
IfyouhaveaTrunkassociation,chooseaTrunkID(1to8)fromthedrop-downmenu.
• TypetheIPaddressoftheportalintheeldprovided.
• Typethesubnetmaskoftheportalintheeldprovided.
• IfyouhaveaVLANassociation,enteraVLANtag(1to4094)intheeldprovided.
• FromtheIPTypedrop-downmenu,chooseIPv4orIPv6.
DHCPiscurrentlysupportedonlyforIPv4.
6. Click the Submit button.
DeletInG IScSI PortalS
To delete an iSCSI portal:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Portal tab.
4. Clicktheportalyouwant,thenclicktheDelete button.
5. In the Conrmationbox,typetheword“conrm”intheeldprovidedandclicktheConrm button.
The portal is removed from the list.
vIewInG a lISt of IScSI PortS
AniSCSIportisthephysicaliSCSIconnectionontheASUSDS300fG2.TherearefouriSCSIportsoneachRAID
controller for a total of eight per subsystem.
To view a list of ports:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Port tab.
Port information includes:
•
PortID–IDnumberoftheport
• ControllerID–1or2
• LinkStatus–Upordown,activeorInactive
• JumboFrames–Enabledordisabled*
• CurrentSpeed–InMb/s
• AssignedPortals–Portalstowhichthisportisassigned
Items marked with an asterisk (*) are adjustable under “MakingiSCSIPortSettings”