Specifications

DS300f G2 Series User Manual
111
makInG IScSI tarGet SettInGS
To make target settings:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Target tab.
4. Clickthetargetyouwant,thenclicktheSettings button.
5. Make settings changes are required:
•
Alias
• EnableHeaderDigest
• EnableDataDigest
• EnableUni-directionalCHAPAuthentication
• EnableBi-directionalCHAPAuthentication
• EnableNOP-In
6. Click the Submit button.
vIewInG a lISt of IScSI PortalS
To view a list of iSCSI portals:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Portal tab.
Portal information includes:
• ID
–Portalnumber.Startsat0.
• IPAddress–IPaddressoftheportal.
• ControllerID–RAIDcontrollerID,1or2.
• PortID–PhysicalportontheRAIDcontroller,1to4.
• TrunkID–TrunkID,1to8.Referstoportalsassociatedwithatrunk(link
aggregation).N/Ameansthisportalisnotassociatedwithatrunk.
• VLANTag–VLANTag,1to4094.ReferstoportalsassociatedwithaVirtualLocal
AreaNetwork(VLAN).N/AmeansthisportalisnotassociatedwithaVLAN.
vIewInG IScSI Portal InformatIon
To view information about a portal:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Portal tab.
4. Clicktheportalyouwant,thenclicktheView button.
Portal information includes:
•
PortalID–Portalnumber.Startsat0.
• TrunkID–1to8.Referstoportalsassociatedwithatrunk(linkaggregation).
N/Ameansthisportalisnotassociatedwithatrunk.
• ControllerID–RAIDcontrollerID,1or2.
• VLANTag–1to4094.ReferstoportalsassociatedwithaVirtualLocalArea
Network(VLAN).N/AmeansthisportalisnotassociatedwithaVLAN.
• PrimaryIP-IPAddress
• PrimaryIPMask-subnetmask
• Gateway-IPaddressofthegatewayroutingdevice
• PortID–PhysicalportontheRAIDcontroller,1to4.
• InterfaceName–Ethernetinterfacenames.
• AssociatedType–PHY,VLAN,orTrunk.
• DHCP–Enabledordisabled.*DHCPiscurrentlysupportedonlyforIPv4.
• TCPPortNumber–TCPportnumber.3260isthedefaultandrecommendednumber.
• AssignedTargets–IDsofthetargetstowhichthisPortalis
assigned.N/Ameansnotargetisassigned.
See"AddingiSCSIPortals"onpage111
Items marked with an asterisk (*) are adjustable under "Making iSCSI Portal Settings"
aDDInG IScSI PortalS
ASUS DS300f G2 supports up to 32 iSCSI portals. Each iSCSI portal can belong to a different VLAN for a
maximum of 32 VLANs.
If you plan to associate the new portal with a trunk, create the trunk rst. See “Adding iSCSI Trunks” on
page 113.
FormoreinformationaboutiSCSIVLANs,see"iSCSI on a VLAN" on page <?>.